Description

You can use the reference table below to work out the size you need:

These decals can be applied using your iron at home.

DETAILS:

All of the decals are cut from high-quality premium printable heat transfer vinyl.

INCLUDED:

• 1 x HTV Decal
• 3 x strips of heat-resistant tape.
• 1 x Application instruction leaflet.

HOW TO APPLY YOUR HTV Decal:

1. Clean the area thoroughly with a lint roller. Do not let any residue left behind as it will prevent the decal from adhering properly. Lightly press your garment to remove any moisture from the fabric.

2. Heat your iron to halfway between the wool and cotton settings, place on top of the HTV and press down. Hold for 20-30 seconds. If the surface of your iron is smaller than the HTV, press in sections.

4. Slowly peel back the transfer sheet and let the HTV cool for 30-60 secs.

CARE INSTRUCTIONS:

Gentle wash inside out and lay flat to dry. I recommend that you leave your transfer for 72 hours once applied to allow time for the item to cure and adhere well to the surface.  Using a tumble dryer is not recommended.

SHIPPING:

All products are made to order, and the current turnaround time for this product is about 2-3 business days. Your items will be shipped using Australia Post.

For the Mythical Creatures Decals, please note:

I am not the copyright holder for the images used to create these stickers, but I have a license to use them for commercial purposes. The images were sourced from CreativeFabrica.com and https://www.creativefabrica.com/designer/whimsyandwishes/

You can also check out my ETSY store here: https://www.etsy.com/au/shop/StickerBitsAU